MOTOKITDECO

Yamaha · Motocross / enduro

Graphics kits forYamaha YZ250F 2014⁠-⁠2018

Fuel injection, a reversed cylinder, the tank under the seat: the 2014 to 2018 YZ250F opened a new generation at Yamaha. Its plastics deserve a kit to match, with your number, your name and a vinyl made to hold on motocross plastic.

Your YZ250F isn't from 2014-2018? Kits for the YZ250F 2010-2013

Exclusive designs

Theme

Themes

The same liveries on all our bikes, your race number included, 100 MAD less than the exclusives.

All themes

A design made only for your YZ250FCustom

Updated 21 November 2026

Identify your generation

In 2014, Yamaha completely redesigned the YZ250F: fuel injection, a reversed-cylinder engine (intake at the front, with the exhaust wrapping around the cylinder before heading to the rear), an aluminium bilateral frame and the fuel tank under the seat. This bodywork stayed until 2018. In 2019, the YZ250F got new bodywork.

GenerationModel yearsWhich kit?
YZ250F carburettor2010 to 2013Its own kit: YZ250F 2010-2013
YZ250F fuel injection, reversed cylinder2014 to 2018This kit, shared with the YZ450F 2014-2017
YZ250F new bodywork2019 onwardsThis kit does not fit: custom

Our kit is cut for the YZ250F from 2014 to 2018. It fits neither a 2019 or newer model, nor a 2010-2013, which has its own page. For a 2019 onwards, the workshop designs your kit as a custom project, from 1,500 DH. If in doubt, send a side photo before ordering. The kit is compatible with the YZ250F; MOTOKITDECO is not affiliated with Yamaha.

YZ250F or YZ450F: the same kit

The 2014 to 2017 YZ450F uses the same plastics as the 2014 to 2018 YZ250F, so the kit and designs are the same. The 450 stands out with its bigger engine and larger silencer, not its bodywork. Everything is covered on the YZ450F 2014-2017 page.

The 24 parts of the kit

  • The front number plate: it carries your number, facing the crowd.
  • The radiator shrouds, tank sides and top covers (left and right): the largest surface from the side, with room for your name.
  • The side number plates, with your number. Left and right have different shapes, because the exhaust exits on the right.
  • The rear fender and the swingarm, which finish off the profile.
  • The front fender, in several parts.
  • The fork guards, with end caps and tops.

4 exclusive designs, 3 colourways each

The workshop drew four original designs on this generation's template, at 990 DH for the full kit:

  • BLAZE: tapered flames streaking backwards. Colourways Feu, Glacier, Venin.
  • AERO: flow lines wrapping around the number. Colourways Ciel, Corail, Minuit.
  • ORBIT: large circles centred on the wheel hubs. Colourways Rouge, Cobalt, Mandarine.
  • RECON: a shattered camouflage. Colourways Désert, Kaki, Graphite.

Prefer a style shared across several bikes? The FACTORY, FUEL, WILD and GEAR themes are also available for this YZ250F, at 890 DH. Every kit can be seen on the bike before you order, on the kits page.

Your number and name, included

As motocross rules require, your race number (0 to 999) is printed on the front plate and on both side plates. Your first name or nickname (12 characters max, in Latin or Arabic letters) goes on the radiator shrouds. Both are included in the price.

Long names

Each design has its own room for long names: 12 characters do not fit everywhere at the same size. Beyond what the design accepts, or for extra text, go custom. You can try your ideas in the design studio.

A vinyl made for motocross plastics

Motocross plastics are polyethylene or polypropylene: greasy, flexible materials where adhesive grips less well than on painted bodywork. So every kit is printed on High-Tack vinyl with a reinforced adhesive, and protected by a thick laminate. Both are included at no extra cost. Preparation does the rest:

  1. Remove the old kit and any glue residue.
  2. Wash the plastics, let them dry, then degrease with isopropyl alcohol.
  3. Warm the plastic slightly, no more than lukewarm to the touch.
  4. Lay each part from the centre outwards and press firmly, especially on the edges.
  5. Wait 24 to 48 hours before riding or using a pressure washer.
Preparation

Greasy, deeply scratched or cold plastic is the main cause of peeling. On badly worn plastics, no vinyl will hold as well as on new ones.

Side plates: 1 or 2 pieces

The side plates come in 1 piece, for a complete look with no join, or in 2 pieces, for easier fitting. The design is the same either way: ask the workshop for the version you prefer when you order.

The full step-by-step is in the fitting guide. For the sun, follow the sun care guide, and for the big picture on graphics kits in Morocco, read the complete guide.

Ordering and delivery

Free delivery anywhere in Morocco and cash on delivery. Preparation takes 24 to 72 hours, then 2 to 5 working days in big cities and 5 to 10 elsewhere. Another bike? All supported motorcycles are listed on the site.

FAQ

Which YZ250F years does the kit fit?

YZ250F models from 2014 to 2018, with fuel injection and a reversed cylinder. It does not fit a 2019 or newer bike, which has new bodywork, nor a 2010-2013, which has its own kit. If in doubt, send a side photo before ordering.

Does this kit also fit a YZ450F?

Yes, the 2014 to 2017 YZ450F, which uses the same plastics. The designs are the same. The 2018 YZ450F has new bodywork, so the kit does not fit it.

Does the kit stick to motocross plastics?

Yes. It is printed on High-Tack vinyl with a reinforced adhesive and a thick laminate, included at no extra cost. Prepare well: cleaning, degreasing with isopropyl alcohol, slightly warm plastic and firm pressure. Wait 24 to 48 hours before riding.

Side plates in 1 or 2 pieces: which should I choose?

The 1-piece version gives a complete look with no join. The 2-piece version is easier to fit. The design is the same: ask the workshop for your version when you order.

Do the number and name cost extra?

No. The number (0 to 999) on the front plate and both side plates, and the first name or nickname (12 characters max, Latin or Arabic letters) on the radiator shrouds are included in the kit price.

Cart

Favourites

No favourites yet.
Tap the heart on a kit to keep it here, then ask your mates what they think.

Ready-to-fit kits

Display and accessibility

Theme
Contrast
Text size
Spacing
Font
Animations
Underlined links

Accessibility