COSMICYamaha Slider Stunt · 2004-2018
COSMIC graphics kit for Yamaha Slider Stunt
from 690 MAD
Yamaha · Scooter
Graphics kits forYamaha Slider Stunt
Slider at Yamaha, Stunt at MBK: a 50 cc with bodywork cut to the bare minimum, built for street style. Little plastic, so every decorated part counts double.
ELECTROYamaha Slider Stunt · 2004-2018
ELECTRO graphics kit for Yamaha Slider Stunt
from 690 MAD
F1 AssistanceYamaha Slider Stunt · 2004-2018
F1 Assistance graphics kit for Yamaha Slider Stunt
from 690 MAD
PAINTINGYamaha Slider Stunt · 2004-2018
PAINTING graphics kit for Yamaha Slider Stunt
from 690 MAD
RACEYamaha Slider Stunt · 2004-2018
RACE graphics kit for Yamaha Slider Stunt
from 690 MAD
A design made only for your Slider StuntCustom
Updated 30 October 2026
Slider and Stunt, the same scooter
Yamaha's Slider and MBK's Stunt are the same scooter, built in France and sold under two names depending on the market. It arrived around 2000 with a stripped-back look: minimal fairing, air-cooled 49 cc two-stroke engine. Naked versions, with their own front and side panels, appeared in the mid-2000s.
| Version | Years (approx.) | What matters for graphics |
|---|---|---|
| Slider / Stunt | around 2000 to mid-2010s | Single or twin headlight fronts depending on version |
| Slider / Stunt Naked | mid-2000s to 2016 | Specific panels |
Production years vary between sources, and several front panels existed. Our kits are listed for 2004-2018: send a front and a side photo before ordering and we'll confirm the kit.
Little bodywork, lots of impact
On a Slider, the decorable surface is limited. That's exactly what makes a kit effective: a few parts are enough to transform the scooter.
- The front: the most visible part, the one that gives it character.
- Side panels under the seat: the main area in profile.
- Front mudguard: links the design to the wheel.
- Small leg shield: for a colour accent.
Areas to avoid
The Slider shows a lot of mechanics and raw black plastic. Don't stick vinyl on textured plastic or near the engine and exhaust, which get hot.
Which style for a Slider?
Its street look calls for bold designs. RACE and F1 ASSISTANCE for a racing spirit, ELECTRO and COSMIC for graphics, PAINTING for a painted effect.
Everything shows
On such a bare scooter, match the kit with the visible parts: seat, wheels, frame colour. The result looks designed, not just stuck on.
Want your nickname, your number or a design that exists nowhere else? Try it in the design studio, then go custom.
Fitting and care
Small parts, lots of curves: work in the shade, degrease, warm the film slightly on bends. Repair cracked plastics first: vinyl doesn't hide cracks. The step-by-step is in the fitting guide, care tips in the sun care guide, and the legal side in the regulations guide.
FAQ
Will the Slider kit fit an MBK Stunt?
In principle yes: Slider and Stunt are the same scooter under two brands. Several front panels existed over the years: send a photo so we can confirm.
Will the kit fit the Naked version?
Naked versions have their own front and side panels. Send a photo: we'll tell you if the kit fits or if you need a custom one.
My plastics aren't original. Is that a problem?
Aftermarket plastics can differ slightly in shape. A photo before ordering lets us check the kit fits.
How long does fitting take on a Slider?
Less than on a maxi-scooter, since there are few parts. Allow one to two hours without rushing, more if it's your first time.