MOTOKITDECO

Yamaha · Motocross / enduro

Graphics kits forYamaha YZ250F

The carbureted YZ250F from 2010 to 2013 is still a safe bet on Moroccan tracks. Tired plastics and peeling stickers? A fresh kit with your number and name gives it the look of a race bike again.

Exclusive designs

Theme

Themes

The same liveries on all our bikes, your race number included, 100 MAD less than the exclusives.

All themes

A design made only for your YZ250FCustom

Updated 20 November 2026

Which YZ250F do you have?

For 2010, Yamaha gave the YZ250F an aluminium "Bilateral Beam" frame and updated bodywork, while keeping the carburettor. The bike changed little through 2013. In 2014 everything changed: fuel injection, a rearward-slanted cylinder, intake at the front, a rear-routed exhaust and all-new plastics.

GenerationModel yearsWhat matters for graphics
YZ250F carburettor2010 to 2013Aluminium Bilateral Beam frame, this generation's plastics: our kit
YZ250F fuel injection2014 onwardsReversed cylinder, all-new plastics: custom

Our kit is cut for the YZ250F from 2010 to 2013 and only that bike. It does not fit a 2014 or newer model: for those, the workshop designs your kit as a custom project, from 1,500 DH. If in doubt, send a side photo before ordering. The kit is compatible with the YZ250F; MOTOKITDECO is not affiliated with Yamaha.

The 23 parts of the kit

  • The front number plate: it carries your number, facing the crowd.
  • The radiator shrouds, upper and lower parts: the largest surface from the side, with the panel for your name.
  • The side number plates, in 3 parts on each side. Left and right have different shapes, because the exhaust runs on the right.
  • The rear fender and the front fender in 3 parts.
  • The fork guards, with end caps and points.
  • The swingarm strips, which finish off the profile.

4 exclusive designs, 3 colourways each

The workshop drew four original designs on the YZ250F template, at 990 DH for the full kit:

  • WHIP: torn diagonal blades over a worn track grain. Colourways Volt, Rouge, Cyan nuit.
  • ERG: the contour lines of an erg dune field, with a sun behind the number. A nod to Morocco. Colourways Sable, Nuit d'erg, Braise.
  • STATIC: halftone gradient and glitch bands. Colourways Rose néon, Volt, Blanc.
  • FACET: faceted relief with a sharp accent edge. Colourways Ardoise, Glace, Lave.

Prefer a style shared across several bikes? The FACTORY, FUEL, WILD and GEAR themes are also available for the YZ250F, at 890 DH. Every kit can be seen on the bike before you order, on the kits page.

Your number and name, included

As motocross rules require, your race number (0 to 999) is printed on the front plate and on both side plates. Your name or nickname (12 characters max, in Latin or Arabic letters) goes in a panel on the radiator shroud. Both are included in the price.

Long names

Each design has its own room for long names: a 12-character name does not fit everywhere at the same size. Beyond what the design accepts, or for extra text, go custom. You can try your ideas in the design studio.

Fitting on motocross plastics

Motocross plastics are polyethylene or polypropylene: low surface energy materials, where adhesive grips less well than on painted bodywork. That is why motocross kits use a thicker vinyl with a reinforced adhesive. Preparation does the rest:

  1. Remove the old kit and any glue residue.
  2. Wash the plastics, let them dry, then degrease with isopropyl alcohol.
  3. Warm the plastic slightly, no more than lukewarm to the touch.
  4. Lay each part from the centre outwards and press firmly, especially on the edges.
  5. Wait 24 to 48 hours before riding or using a pressure washer.
Preparation

Greasy, deeply scratched or cold plastic is the main cause of peeling. On badly worn plastics, no vinyl will hold as well as on new ones.

The full step-by-step is in the fitting guide. For the sun, follow the sun care guide, and for the big picture on graphics kits in Morocco, read the complete guide.

Ordering and delivery

Free delivery anywhere in Morocco and cash on delivery. Preparation takes 24 to 72 hours, then 2 to 5 working days in big cities and 5 to 10 elsewhere. Another bike? All supported motorcycles are listed on the site.

FAQ

Does the kit fit a 2014 or newer YZ250F?

No. In 2014 the YZ250F moved to fuel injection, with a rearward-slanted cylinder and all-new plastics. Our kit is cut for 2010 to 2013. For a 2014 or newer bike, the workshop designs a custom kit from 1,500 DH.

Do the number and name cost extra?

No. The number (0 to 999) on the front plate and both side plates, and the name or nickname (12 characters max) on the radiator shroud are included in the kit price.

Does the kit stick to motocross plastics?

Yes, with proper preparation: cleaning, degreasing with isopropyl alcohol, slightly warm plastic and firm pressure. Motocross kit vinyl is thicker, with a reinforced adhesive. Wait 24 to 48 hours before riding.

Why are the left and right plates different?

Because the exhaust runs on the right: the right side plate is cut around it. Each side has its own shape, in 3 parts.

How much is delivery and how long does it take?

Delivery is free anywhere in Morocco, with cash on delivery. Allow 24 to 72 hours of preparation, then 2 to 5 working days in big cities and 5 to 10 elsewhere.

Cart

Favourites

No favourites yet.
Tap the heart on a kit to keep it here, then ask your mates what they think.

Ready-to-fit kits

Display and accessibility

Theme
Contrast
Text size
Spacing
Font
Animations
Underlined links

Accessibility